รายละเอียด
This is the new-released SD card V4.0 shield. It provides a storage space for your Arduino. Users can read/write SD card via Arduino’s built-in SD library. It supports SD, SDHC and Micro SD cards. It will only occupy the SPI port of your Arduino. Comparing to previous versions, it combines the standard SD slot and the Micro SD slot into a standard slot, the included adaptor enables using of Micro SD cards . You can stack on other shields that work with the unused pins. Additionally, the preformed I2C and UART port facilitate your connection with Grove modules.
ระยะเวลาในการรับประกัน: 12 เดือน
คุณสมบัติ
- Standard SD card, SDHC card, microSD and TF card compatible
- UART Grove & I2C connection compatible
- Fully supported SD Library
- Minimal number of SPI port
- Truly stackable
Specifications:
- Voltage: 3.5V (Min), 5.0V (typical), 5.5V(Max)
- Current: 0.159mA (Min), 100mA (Typical), 200 mA(Max)
- Supported Card Type: SD card(less than or equal to 32GB); Micro SD card(less than or equal to32GB); SDHC card(less than or equal to32GB)
- Dimension: 68.7x53.5x19.00 mm
- Net Weight: 14.8g
รายการบรรจุภัณฑ์
- 1 x SD card Shield V4
- 1 x MicroSD card adapter
แหล่งที่มาข้อมูล
Please visit the
wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our
forum.
แท็ก: card,
shield,
arduino,
shields,
shield-sd