*แจ้งวันหยุด* ทางบริษัทจะปิดทำการวันที่ 22 และ 29 กรกฎาคม 67 ตามปฏิทินวันหยุดของไทย เพราะฉะนั้นออเดอร์จะทำการจัดส่งอีกครั้งในวันทำการถัดไป

Servo Driver HAT for Raspberry Pi, 16-Channel, 12-bit, I2C

THB583.26 (VAT included)
เงินคืน: THB16.35
  • 5 ชิ้นขึ้นไป THB553.67
  • 20 ชิ้นขึ้นไป THB524.93
  • สินค้าในสต๊อก: เฉพาะสินค้าพรีออเดอร์
    • Estimate 9 units available on 2 Aug 2024.
    • ส่งจาก: Malaysia

    Buy locally from a partner

    ประเทศ:
    รายละเอียด

    Raspberry Pi has become so popular, it is not only for education but also being used in Robotics too. In many cases, RC (remote control) servos are used in robotics and yet Raspberry Pi might struggle to output accurate PWM signal. You may have tried to control a robotic arm or a hexapod walker by using the Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now with Servo Driver HAT, you have an option to bring your ideas to life.

     

    As you might know, due to the operating system, Raspberry Pi is not designed to generate precise and continuous pulses, for example, tone pulse for the piezo buzzer and PWM for RC servo. You will get some jittering over time. This HAT is designed to solve this problem. The onboard PCA9685 is capable of generating 16 channels of pulses with 12-bit resolution and communicating with Raspberry Pi via I2C, freeing up other GPIO for other applications. Of course there example for it too :)

     


    Not to forget the built-in 3A output 5V switching buck converter. You can input 6V to 12V (through terminals) from Lipo, SLA or switching power supply to power the RC servo.

     

    ระยะเวลาในการรับประกัน: 12 เดือน
    คุณสมบัติ
    • Raspberry Pi connectivity, compatible with: 
    • I2C controlled, using only 2 pins
    • Up to 16-channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales)
    • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal
    • Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc.
    • Reserved I2C control pins, allows to work with other control boards
    • Comes with development resources and manual (examples in python like Bluetooth/WiFi remote control)

    Specifications:

    • Power supply: 5V (GPIO connector) OR 6V~12V (VIN terminal)
    • Servo voltage: 5V
    • Logic voltage: 3.3V
    • Driver: PCA9685
    • Control interface: I2C
    • Dimension: 65mm x 30mm
    • Mounting hole size: 3.0mm

    Dimensions:

    รายการบรรจุภัณฑ์
    • 1 x HAT Servo
    • 2 x 10mm spacer (2.00 mm diameter) with screws and nuts
    แหล่งที่มาข้อมูล
    Q & A

    Ask a question

    ความคิดเห็น
    • 4.9 out of 5
                    
    เรียงตาม:

    แท็ก: Raspberry pi, servo controller, 16 Channel, I2C