*แจ้งวันหยุด* ทางบริษัทจะปิดทำการวันที่ 22 และ 29 กรกฎาคม 67 ตามปฏิทินวันหยุดของไทย เพราะฉะนั้นออเดอร์จะทำการจัดส่งอีกครั้งในวันทำการถัดไป

Jetson Nano Metal Case with Camera Mount

THB550.00 (VAT included)
เงินคืน: THB15.42
  • 5 ชิ้นขึ้นไป THB522.50
  • 20 ชิ้นขึ้นไป THB495.00
  • สินค้าในสต๊อก: 17

    Buy locally from a partner

    ประเทศ:
    รายละเอียด

    It is always good to protect your single-board computer, and that includes the NVIDIA Jetson Nano. Cytron Marketplace now carries the metal case with a camera mount for the Jetson Nano.

    Note: This case does not come with Jetson Nanocamera module, fan, and wireless network card with the antenna. Please get them separately if you need them.

    This case is specially designed for the Jeston Nano A02/B01 board and is made of durable metal. The front side of the casing is reserved for DC power supply, 2 display interfaces, 4 USB interfaces, network cable, Micro USB interface holes, and two holes of the wireless network card antenna; the top of the casing possess an onboard camera wiring hole area is easy for user installation and a vent that supports an anti-reverse cooling fan; the right side with GPIO interface is convenient for the user to connect to the external device; the backside reserves two holes for reset and power button, and also a hole to install TF card. It also has a camera bracket included. The overall appearance is good-looking, practical, and integrated.

    How to assemble?

    • Remove the Jetson Nano system on module (SOM), assemble the wireless module, and screw it back in place.

    • Mount the reset and power buttons on the metal box, note that the button with four wires is the Power button and another button with two wires is the Reset button.

    • Connect buttons connector to Jetson Nano. Please refer to the diagram. Insert the micro SD adapter board to the Micro SD slot of Jetson nano. Press the adapter to lock it in place. 

    Note: To remove the microSD adapter from the Jetson Nano MicroSD card slot, you should press the adapter to make sure that the adapter pops-up, then you can safely remove it. You cannot directly pull it out. Otherwise, you will break the Micro SD slot.

     

    • Adjust the cables and mount the Jetson Nano developer Kit in the metal box. Fix it with screws provided. You should also fix the Micro SD adapter board by using a screw.

    • Fix the Jetson Nano GPIO adapter board in the metal box by skews.

    • Fix the antennas of the wireless module on the metal box. Assemble the cooling fan.

    • Connect Jetson nano to the GPIO adapter by flat cable provided.

    • Fix the camera holder-bottom on the metal cover.

    • Fix camera on camera holder-top by black nylon screws provided.

    • Assemble camera holders by screws. Adjust the angle and turn it tightly.

    • Connect the cable cables to Jetson Nano (you can first remove it from cameras), If you have only one camera, just need to connect one cable.

    • Assemble the top case. Then connect the camera cable and antennas. Sxrew the top and bottom case together.

    ระยะเวลาในการรับประกัน: 12 เดือน
    คุณสมบัติ
    • Metal case for Jetson Nano A02/B01 board 
    • Support for installing Wireless Network Card antenna
    • Comes with a camera holder that supports both single and binocular camera.
    • Comes with  reset and power buttons, with system status indicator (B01 only, NOT available for the original version)
    • Supports cooling fan with anti-reverse connection (fan is not included in the box)
    • Allows installation of 4G module inside (Recommendation: SIM7600G-H 4G for Jetson Nano)
    • Clever opening design, easy access to the peripheral connectors
    • DIY (Do It Yourself) case
    • Takes around 5 to 10 minutes to assemble 

    Note: The camera modules are NOT INCLUDED. Please get them separately. The camera holder also supports the Raspberry Pi Camera Module V2.

    Note: 5V fan is NOT INCLUDED. Please get them separately.

    Note: The system status indicator is applicable for B01 only, NOT available for the original version (A02)

    Note: 4G Module SIM7600G-H is NOT INCLUDED. Please get them separately.

    Note: AC8265 WiFi Bluetooth NIC Module is NOT INCLUDED. Please get them separately.

    รายการบรรจุภัณฑ์

    Packing list:

    • Body cover (top and bottom)
    • Camera bracket (top and bottom)
    • Jetson Nano Board Adapter
    • Micro SD Card Adapter Board
    • 2*20 Pin Ribbon Type Flat Cable
    • Wrench
    • Screwdriver
    • Button with 2PIN cables
    • Button with 4PIN cables
    • Package Screws
    • Mini Jumper

    แหล่งที่มาข้อมูล
    Q & A

    Ask a question

    ความคิดเห็น
    • 4.8 out of 5
                    
    เรียงตาม:

    แท็ก: NVIDIA, Jetson Nano, metal case, enclosure