DC-DC Mobile Charger 5V3A (Input 6-24V)

DC-DC Mobile Charger 5V3A (Input 6-24V)

    • Login to view ProMaker's Insider Price!
    • THB60.40(VAT included)
  • Ex Tax: THB60.40
    • 10 ชิ้นขึ้นไป THB58.14
    • 50 ชิ้นขึ้นไป THB54.36
  • เงินคืน: 3%
  • ยอดคงเหลือ CytronCash: เข้าสู่ระบบ
  • สินค้าในสต๊อก:
  • รหัสสินค้า: DC-DC-5V3A
  • ระยะเวลาในการรับประกัน: 12 เดือน
  • Shipping:

This is an awesome switching voltage regulator, buck regulator to be exact. Maximum output at 3A, 5VDC, with the input voltage ranging from 6V to 24VDC. Very suitable for solar panel to power Arduino or any MCU at 5V, or battery charger that require stable 5V. The switching regulator provides power efficiency up to 97%.


  • Latest buck switching regulator
    • Switching frequency: 500KHz
  • Output voltage at 5.1 to 5.2VDC
  • Input voltage: 6V to 24VDC
  • Maximum output current at 3A, 2.1A continuous.
  • Low voltage ripple at 10mV.
  • High efficiency:
    • 6.5V input, 5V 0.7A output offers 97.5% efficiency
    • 12V input, 5V 1A output offers 94% efficiency
  • Output is standard USB A type connector, connect to your USB cable for charging your phone, even Raspberry Pi or Arduino board.
  • Output voltage is protected with 5V 300W TVS.
  • Output short circuit protection: Yes, but not recommended for long hour short circuit.
  • Input is protected with 1.5V fuse and diode for reverse polarity protection.
  • LED for output supply indicator.
  • Industrial operating temperature range: -40 degree C to 85 degree C
  • Super compact, the whole module is only 26.4mm x 15mm x 7.4mm
any polarity? don't mark positive and negative at terminal ( azlan, 22/09/2020 )
Hi, yes it has polarity. Thanks :)
Hi, can I get the datasheet, schematic and any related specification of this module.
( Baldeep Singh , 21/10/2019 )
Hi! We're sorry as we do not have the data at the moment. Thanks :)
what are the dimensions
( Ian, 22/04/2019 )
Hi, it is 26.4mm x 15mm x 7.4mm.
can i use this as charger module which is powered up by solar panel to charge a powerbank?
( izuan, 01/09/2018 )
Hi, sorry we don't have any experience to use it for that purpose.
Can this be used to power up pi via standard 12V car battery? ( Saran, 06/06/2018 )
Hi, the input voltage for this module is from 6V to 24VDC. So 12V car battery should be no problem. Thanks.
im looking for mobile raspberry pi 3 power supply... is it suitable as a power supply for raspberry pi 3? ( Azlan, 07/02/2018 )
Yes, this module can be considered to power up Raspberry Pi 3. Please take note that the input voltage for this module is 6V to 24VDC, you may need 2 cell/3 cell LiPo battery. For further questions, please visit to our technical forum for similar question or post your question there, as this session is only for short inquiry. Thanks.

Ask a question

Note: HTML is not translated!
  • 5 out of 5
ความคิดเห็นทั้งหมด (36)
  • 5
  • 4
  • 3
  • 2
  • 1

แท็ก: DC-DC, Mobile Charger, Charger, 5V3A