รถเข็นของคุณว่างเปล่า!
CSI to HDMI Converter boards - RPi Camera Cable Extension
- แบรนด์ Arducam รหัสสินค้า: RPI-CSI-HDMI
This is an adapter that uses the HDMI signal to extend the CSI signal of Raspberry Pi cameras, which could be much longer than using an extension ribbon cable. It’s used in pairs and you need another standard HDMI cable to use this adapter.
The CSI-HDMI adapter board is designed for Raspberry pi camera board (V1, V2, and HQ camera) to extend the camera over the long cables while keeping the high-speed CSI signals away from noise and interference.
Note: It's not recommended to use this with Camera V3 as it may result in a flickering display problem.
Note: Raspberry Pi board and standard HDMI cable are not included in the pack. Please get them separately.
By using a high-speed HDMI cable, the camera can run over 10 meters, which greatly extends the usage of the Raspberry Pi cameras. In addition, to extend the camera signal, the adapter board provides another 3 signals to be extended with the camera signals together via the headphone jack connector. It can be used to extend standard audio signals, GPIO signals, or other sensor signals according to users' needs. If you need a longer and stronger cable with solid connections, this is the right thing for you.