รายละเอียด
This Base Board provides you with the Raspberry Pi Model B form factor of the Raspberry Pi CM4 :)
It enables you to evaluate the Raspberry Pi CM4 (both wireless and non-wireless)
It is also compatible with CM4 with eMMC or CM4 Lite (without onboard eMMC). The Mini Base Board extended out the Raspberry Pi standard 40-pin GPIO onto color-coded headers.
Compact yet complete with many practical and useful peripherals/ports:
- CSI
- DSI
- FAN (Only 5V fan)
- Full-Size HDMI
- USB
- RJ45 Gigabit Ethernet
- Micro SD Card Slot
- M.2 Slot
Note: Only support NVME SSD M.2 Key M, 2230 and 2242, this board DOES NOT support M.2 SATA III SSD.
- CM4 socket:
- suitable for all variants of Compute Module 4
- Power input/Programming:
- 5V/2.5A power supply, or used for eMMC burning
- DISP:
- MIPI DSI display port
- FAN:
- For connecting cooling fan, only support 5VDC fan, no speed control
- CAM
- 2 x MIPI CSI camera ports
- HDMI0 connector:
- HDMI0 port supports up to 4K 30fps output
- USB 2.0 ports:
- 2 x USB 2.0 ports, for connecting sorts of USB devices
- USB2.0 is closed by default, if you need to open it, you need to add dtoverlay=dwc2,dr_mode=host
- Gigabit Ethernet connector
- Gigabit Ethernet RJ45 connector, with 10 / 100 / 1000M network support
- M.2 indicator:
- Indicating the operating status of M.2 interface
- ACT indicator:
- Indicating the operating status of Raspberry Pi
- PWR indicator:
- Indicating the status of Raspberry Pi power supply
- BOOT selection:
- ON: CM4 would be booted from the USB-C interface
- OFF: CM4 would be booted from eMMC or Micro SD card
- 40PIN GPIO header:
- Raspberry Pi Standard 40-pin GPIO, in color-coded headers
- Micro SD card slot:
- For connecting a Micro SD card with a pre-burnt image (Lite variant ONLY)
- HDMI1 FFC connector:
- HDMI1 port supports 4K 30fps output
- Requires another adapter board (optional)
- USB 2.0 FFC connector:
- Can be connected through an adapter
- Requires another adapter board (optional)
- FE1.1S
- USB HUB chip, expanding one USB port to 4x ports
- M.2 slot:
- supports sorts of NVME SSD, or communication modules with PCIe M.2 KEY-M interface
- NVME SSD 2230 and 2242 ONLY
- Not Compatible with SATA M.2 SSD
Features and Specs:
- Carrier or expansion board for Raspberry Pi CM4
- Model: A
- Suitable for all variants of Compute Module 4, Wireless, Non-wireless, with eMMC, without eMMC
- NETWORKING: Gigabit Ethernet RJ45 connector
- M.2: M KEY, supports communication modules or NVME SSD
- CONNECTOR: Raspberry Pi 40-pin GPIO header
- USB: USB 2.0 Type A × 2, USB 2.0 via FFC connector × 2
- DISPLAY: MIPI DSI display port (15pin 1.0mm FPC connector)
- CAMERA: MIPI CSI-2 camera port × 2 (15pin 1.0mm FPC connector)
- VIDEO: HDMI port × 2 (including one port via FFC connector), supports 4K 30fps output
- RTC: N/A
- STORAGE: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants
- FAN HEADER: no fan control, 5V
- POWER INPUT: 5V, via USB-C receptor
- DIMENSIONS: 85 × 56mm
Example Application:
Packing List:
- 1 x Raspberry pi Compute Module 4 Mini Base Board
Resources:
ระยะเวลาในการรับประกัน: 12 เดือน
แท็ก: CM4,
Raspberry Pi,
Compute Module 4,
carrier board,
expansion board,
Industrial Development Boards