Note: Since 8th Nov 2018, the PoE HAT is the latest stock that fixed the USB power issue. Please check the release from Raspberry Pi FoundationIt is finally here,..
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer and it is pretty low power..
This is a Multi-function cooling expansion board designed for the Raspberry Pi board. It is compatible with the:Raspberry Pi 4 Model B
1GB RAM
2GB RAM
..
RS485 is one of the most robust wired serial communication protocol that can support distance upto 1200 meters (4000 ft) while CAN (Controller Area Network) is used in au..
If you are new to Raspberry Pi Single Board Computer and wanted to get your hands dirty with electronics and sensors, this sense HAT should be for you.And do you ..
This is a LCD display HAT for Raspberry Pi, 1.44inch diagonal, 128x128 pixels, with embedded controller, communicating via SPI interface. It also comes with three push bu..
This Raspberry Pi GPIO Expansion Board converts the single GPIO headers on your Raspberry Pi into triple parts, enabling more breakout boards, add-on boards or just about..
Ever think of making fully portable Raspberry Pi? Now you can with this Li-ion Battery HAT. This Li-ion Battery HAT integrates SW6106 power bank management chip, to provi..
Raspberry Pi has become so popular, it is not only for education but also being used in Robotics too. In many cases, RC (remote control) servos are used in robotics and y..
This is the easy to use Raspberry Pi GPIO expansion board, compatible with raspberry pi 3 Pi 2 model B and B+. It expands the 40-pin GPIO of Raspberry Pi to another set o..
NB-IoT is a new wireless technology in LPWAN (Low Power Wide Area Network). Different from LoRa or Sigfox, NB-IoT comes from Telco infrastructures, in Malaysia, it must b..
Note: This 2.13-inch E-Ink display HAT is updated from V2 to V3 from October 2020 onwards.E-Ink (Electronic Ink) display has several benefits compared to othe..
Ever wanted to automate your home by controlling AC appliances like light or fan? Well, this HAT might be perfect for you if you are using Raspberry Pi as the controller...
ReSpeaker 2-Mics Pi HAT is a dual-microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that you can build a more powerful and fl..
Raspberry Pi is not only a powerful Single Board Computer, but it also comes with plenty of GPIO that you can interface with other electronic sensors, actuators. With thi..
E-Ink (Electronic Ink) display has several benefits compared to other display technologies:High Visibility and Contrast
Wide viewing angle
and super low power ..
This is a universal driver board for e-Paper raw panels, can be used to drive various SPI interface e-Paper from that we carry.Out of the box, it can be stacked o..
Note: From 25th March 2021 onwards, the X708 HAT is updated to X708 V1.2 from V1.0.The version update:ASD function is removed but you can achieve this func..
Note: The baseplate, PCB Spacers and KM3 screws are not included in packing from May 2021 onwards. This U100 UPS is a Raspberry Pi UPS (Uninterrupted Power..
The IQaudIO DigiAMP+ HAT is the 1st Raspberry Pi HAT compliant Full-HD (192/24) HiFi quality DAC & up to 2x35W (Watt) Class D amplifier designed and produced for Raspberr..
International
Singapore
Malaysia
Thailand
Vietnam
-268x268.jpg "RGB Cooling HAT with fan and OLED for 4B/3B+/3B")
-268x268.JPG "NB-IoT SIM7000E HAT")
