Li-ion Battery HAT for Raspberry Pi, 5V Output, Quick Charge

Note: This is not a UPS HAT for Raspberry Pi, the Raspberry Pi will restart when you connect it to the Pi. If you are looking for UPS HAT, please check:

• UPS Plus V6 For Raspberry Pi, for model B form factor Raspberry Pi
• Raspberry Pi X708 Power Management and UPS HAT, for model B form factor Raspberry Pi
• UPS Power HAT for Raspberry Pi Zero, for Raspberry Pi Zero form factor

Ever thought of making a fully portable Raspberry Pi? Now you can with this Li-ion Battery HAT. This Li-ion Battery HAT integrates the SW6106 power bank management chip, to provide a 5V regulated power supply to your Raspberry Pi from a 14500(size) Li-ion rechargeable battery, making the Raspberry Pi a fully portable device.

The HAT comes with a built-in charger as well to charge the Li-ion battery and supports a bi-directional quick charge. This module can be used as a universal mini power bank, and also works with other 5V devices.

Powering up Raspberry Pi will depend on battery capacity and load current. From the spec, this HAT can power Raspberry Pi 3 Model B+ for around 30 minutes (800mA), or Raspberry Pi Zero for 2 hours.

Note: It does not come with a 14500 Li-Ion rechargeable battery, please get it separately here.

What's on Board:

1. Raspberry Pi GPIO connector: for connecting Raspberry Pi
2. SW6106 power management chip
3. USB Type-C connector: battery charge/power output
4. USB Type-A connector: power output
5. Micro USB connector: battery charge
6. Raspberry Pi power switch
7. Battery warning indicator: on when the battery is reversed
8. Battery power capacity indicator: 5 x LEDs to indicate the power capacity and charging status
9. Quick charge indicator: on when quick charging
10. 14500 battery holder

Dimension:

• Rechargeable Battery HAT designed for Raspberry Pi:
  • Raspberry Pi Zero
  • Raspberry Pi Zero W
  • Raspberry Pi Zero WH
  • Raspberry Pi 3 Model A+
  • Raspberry Pi 3 Model B
  • Raspberry Pi 3 Model B+
• Onboard SW6106 chip, supports bi-directional quick charge, supports multi quick charge protocols like PD/QC/FCP/PE/SFCP
• Lithium battery protection circuitry provides
  • Reverse protection
  • Overcharge/discharge protection
  • Over current protection
  • Short circuit protection
• Onboard LED indicators for:
  • Quick charge
  • Warning
  • Power capacity

Specifications:

• Output voltage: 5V
• Applicable battery: 3.7V 14500 lithium battery (4.2V when fully charged), NOT AA Battery
• Dimension: 65mm × 30mm
• Mounting hole size: 3.0mm

• 1 x Li-ion Battery HAT

• User's Manual
• Schematic
• SW6106 Datasheet