NeoPixels Strip Male & Female Cable 15cm

สินค้าในสต๊อก: Discontinued

Buy locally from a partner

ประเทศ:
รายละเอียด

The Neo pixels are small in size with less circuitry and almost no messy wires since the driver IC is embedded into each LED. Each LED has a minimum of RGB light and hence they can be combined to get almost any colour of your choice. This makes it a very good choice for wearable electronics and other decorative lights.

Each LED on this strip can be individually addressed and programmed, meaning each LED can be set to glow in a different colour. Also, you can add as many LEDs in series as you like to control all of them with a single controller. LED strips can have up to 200+ LEDs, the only constrain is the power and RAM of your controller. If you are using a controller like Arduino, then Adafruit has a library readily available using which these LEDs can be easily programmed. So if you are looking for easy to use programmable LED light then NeoPixels are what you are looking for.

Neo pixel strip male & female connectors are some of the useful accessories that you need to operate the LED strip.

Applications:

  • Cable to connect 2 WS2811/WS2812B LED Strips
  • Connecting a WS2811/WS2812B LED strip which is not mounted directly next to the controller
คุณสมบัติ
  • High quality
  • Easy use
  • With 3P connector male and female insert, which can work with IR controller or power supply.
  • Perfect performance for 12V led strip light WS2811/ WS2812B  or related lamp.
  • Connector Type: 3 pin
  • Material(External): PVC Plastic (Flexible)
  • Rated Temperature: 80°c
  • Rated Voltage: 5~24V
  • Wires: GND, 5V+, DATA
  • Accessory for WS2811/ WS2812B LED Strips
  • Connect method: Male & Female ends push in

 

รายการบรรจุภัณฑ์
  • 1 x 15cm Male 3 Pin Extension Cable
  • 1 x 15cm Female 3 Pin Extension Cable
Q & A

Ask a question

ความคิดเห็น
  • 5 out of 5
                  
เรียงตาม:

แท็ก: neo pixel male and female cable, neopixel, neopixels, connecting cable