รถเข็นของคุณว่างเปล่า!
Jetson Nano Metal Case with Camera Mount
- แบรนด์ WaveShare รหัสสินค้า: BO-JN-M-CF
It is always good to protect your single-board computer, and that includes the NVIDIA Jetson Nano. Cytron Marketplace now carries the metal case with a camera mount for the Jetson Nano.
Note: This case does not come with Jetson Nano, camera module, fan, and wireless network card with the antenna. Please get them separately if you need them.
This case is specially designed for the Jeston Nano A02/B01 board and is made of durable metal. The front side of the casing is reserved for DC power supply, 2 display interfaces, 4 USB interfaces, network cable, Micro USB interface holes, and two holes of the wireless network card antenna; the top of the casing possess an onboard camera wiring hole area is easy for user installation and a vent that supports an anti-reverse cooling fan; the right side with GPIO interface is convenient for the user to connect to the external device; the backside reserves two holes for reset and power button, and also a hole to install TF card. It also has a camera bracket included. The overall appearance is good-looking, practical, and integrated.
Note: To remove the microSD adapter from the Jetson Nano MicroSD card slot, you should press the adapter to make sure that the adapter pops-up, then you can safely remove it. You cannot directly pull it out. Otherwise, you will break the Micro SD slot.
Note: The camera modules are NOT INCLUDED. Please get them separately. The camera holder also supports the Raspberry Pi Camera Module V2.
Note: 5V fan is NOT INCLUDED. Please get them separately.
Note: The system status indicator is applicable for B01 only, NOT available for the original version (A02)
Note: 4G Module SIM7600G-H is NOT INCLUDED. Please get them separately.
Note: AC8265 WiFi Bluetooth NIC Module is NOT INCLUDED. Please get them separately.