Tilt Sensor Module

THB42.27 (VAT included)
เงินคืน: 3%
  • 10 ชิ้นขึ้นไป THB38.88
  • 50 ชิ้นขึ้นไป THB33.81
  • สินค้าในสต๊อก: 80
    • ส่งจาก: Malaysia

    Buy locally from a partner

    ประเทศ:
    รายละเอียด
    The tilt sensor module come with the basic components for operation. Supplying power and it is good to be use. Attach it to object and it will detect whether the object is tilted. Simple usage as it is digital output, so you will know the object is tilted or not by reading the output. It uses SW-460D or SW-520D tilt sensor. The tilt sensor is ball rolling type, NOT Mercury type.

    Comes with a M3 mounting hole for ease of attaching it to any object. On board it provide a tilt switch, high sensitivity and commonly being used for tilt detection. The module comes with power LED and status LED for visual indicator.

    The module will output logic LOW when the module is not tilted until the threshold angle; it will output logic HIGH when it is tilted over the threshold angle. We have tested, the tilt angle is quite big, from 45 degree to 130 degree. However it depends on the angular velocity too. It can be use as vibration sensor too.

    It can be interface with any microcontroller with digital input such as PIC, SK40C, SK28A, SKds40A, Arduino series for tilt detection capability. Also, not to forget, interface with Relay module offer tilt switch :)
    ระยะเวลาในการรับประกัน: 12 เดือน
    คุณสมบัติ
    • Operating voltage: 3.3 to 5VDC
    • Ball Rolling type of tilt sensor.
    • PIN: VCC = 5V, GND = 0V, DO = digital output from module
    • AO is not use in this module.
    * If the DO is not working, you might need to turn the on board potentiometer to center.
    แหล่งที่มาข้อมูล
    Q & A

    Ask a question

    ความคิดเห็น
    • 5 out of 5
                    
    เรียงตาม:

    แท็ก: tilt, sensor, module, others sn-tilt-mod