AD8232 ECG Measurement Kit

This is a low-power, single-lead and heart rate monitor front end for all types of vital signs, based on AD8232. This kit can be used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as an analog reading.

The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode placement. 

How to use:

1. Connect the electrodes and the one-off three-charge wire.
2. Tear off the protective films on the slimes before using.
3. Attach the self-adhesive electrodes to the body and press it tightly.
4. Separate the electrodes and the guide line, cover the electrodes with the protective film after use.
5. Since they are wear-and-tear parts, it is recommended to have several pairs of electrodes. 
6. If the electrodes are a little dry, you can use a few drops of water to moisturize them. That will increase their lifespan. 

Note: This product is NOT a medical device and is not intended to be used as such or as an accessory to such nor diagnose or treat any conditions.

Specifications:

• Power voltage: DC 3.3V
• Output: Analog output
• Interface (connect RA, LA, RL): 3PIN, 2.54PIN or earphone jack
• Size: 36*31*18mm
• Working Temperature: -40 ℃ to +85 ℃

• 1 x AD8232 ECG monitor board
• 3 x Electrode pad
• 1 x One-off three-charge wire

• Product wiki page
• Quick start guide
• Sample code
• Libraries