Standard 3.2kg.cm Plastic Gears Analog Servo

The FS5103B is a general-purpose, low-cost standard analog servo. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included. This servo can work with both 5 V and 3.3 V servo signals. The FS5103B works with standard RC servo pulses, providing a running angle of approximately 180° over a servo pulse range of 600 µs to 2400 µs, and it has a 12″ (30 cm) cable that is terminated with a standard JR-style connector, which is Futaba-compatible. You can find more information about this servo in its datasheet.

This robotics servo is compatible with Cytron Servo controllers:

• 8 Channels Servo Controller Sheild (Arduino)
• 16 Channels Servo Controller
• 8 Channels Servo Controller
• Servo Driver HAT, 16 channels, 12-bit

Features and Spec:

• Analog RC Servo
• Operating voltage: 4.8V to 6.0V
• Specs at 4.8V:
  • Speed:0.18 sec/60°
  • Stall torque: 3 kg-cm
  • Stall Current: 780mA
• Specs at 6.0V:
  • Speed: 0.16 sec/60°
  • Stall torque:3.2 kg-cm
  • Stall Current: 850mA
• Lead length:12 in
• Case type: Nylon & Fiberglass
• Gear type: Plastic Gear
• Wiring:
  • Orange for RC Signal
  • Red for VCC (positive of power)
  • Brown for GND (negative of power)
• Weight: 40.5 g
• Dimensions:40.8 × 20.1 × 38 mm

• 1 x FS5103B Analog RC Servo Motor
• 1 x Pack of different shape of horns, screws, washers

• Datasheet