2.13inch E-Ink Display HAT for Raspberry Pi (Three-color)

THB667.79 (VAT included)
เงินคืน: THB18.72
  • 5 ชิ้นขึ้นไป THB613.69
  • 20 ชิ้นขึ้นไป THB567.20
  • สินค้าในสต๊อก: 8
    • ส่งจาก: Malaysia

    Buy locally from a partner

    ประเทศ:
    รายละเอียด

    Note: This 2.13-inch E-Ink display HAT is updated from V3 to V4 from 2023 onwards.

      This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with an embedded controller, communicating via SPI interface, and supports red, black, and white three-color display. Due to advantages like ultra-low power consumption, wide viewing angle, and clear display without electricity, it is an ideal choice for applications such as shelf labels, industrial instruments, and so on.

       

      Advantages of EINK

      E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: that charged particles suspended in clear fluid will move to the sides of the microcapsule when the electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.


      E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as an e-reader due to its paper-like effect.

       

       

      E-Ink (Electronic Ink) display has several benefits compared to other display technologies:

      • High Visibility and Contrast
      • Wide viewing angle
      • Super low power consumption. It can retain the display for a very long time after power is removed

       

      Standard Raspberry Pi 40 Pin GPIO Header

      Compatible with Raspberry Pi Series Board and Jetson Nano

       

       

      Onboard SPI Control Interface

      For Use With Controller Boards Like STM32/Arduino

       

       

      Onboard Voltage Translator

      Compatible with 3.3V and 5V microcontrollers.

       

       

      Application Examples

      Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags, etc.

       

       

      ระยะเวลาในการรับประกัน: 12 เดือน
      คุณสมบัติ
      • No backlight, keeps displaying last content for a long time even when power down
      • Ultra-low power consumption, basically power is only required for refreshing
      • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
      • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino, etc
      • Onboard voltage translator, compatible with 3.3V/5V MCUs
      • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
      • Stack perfectly on Raspberry Pi Zero board and of course a little smaller than Raspberry Pi 3 & 4

       

      Specifications:

      • Operating voltage: 3.3V/5V
      • Interface: 3-wire SPI, 4-wire SPI
      • Outline dimension: 65mm × 30.2mm
      • Display size: 48.55mm × 23.71mm
      • Dot pitch: 0.229mm × 0.228mm
      • Resolution: 250pixels × 104pixels
      • Display color: red, black, white
      • Grey scale: 2
      • Full refresh time: 15s
      • Refresh power: 26.4mW(typ.)
      • Standby current: <0.01uA (almost none)
      • Viewing Angle: >170°

       

      รายการบรรจุภัณฑ์
      • 1 x 2.13inch E-Ink display HAT
      • 1 x 8-way JST plug to pigtail jumper wire (female terminated)
      • 2 x 8mm spacer (2.0mm diameter) with screws and nuts

       

      Q & A

      Ask a question

      ความคิดเห็น
      • 4.7 out of 5
                      
      เรียงตาม:

      แท็ก: 212x104, WaveShare, 13448, E-INK