3.5-Inch 480x320 TFT 50FPS Touch Screen for Raspberry Pi

THB630.00 (VAT included)
เงินคืน: THB17.66
  • 5 ชิ้นขึ้นไป THB562.97
  • 20 ชิ้นขึ้นไป THB531.69
  • 50 ชิ้นขึ้นไป THB500.42
  • สินค้าในสต๊อก: 7

    Buy locally from a partner

    ประเทศ:
    รายละเอียด

    Note: This is the 3.5-inch TFT Touch Screen LCD only.

    This is the 3.5-inch TFT Touch Screen (Resistive) with a high graphic refresh rate of 50Hz. It is compatible with:

     

    3.5 inches - TFT - 320x480 pixels - Resistive Touch - 50 FPS

     

    The touch screen LCD is ready with 320×480 resolution, 50 FPS (Frame per second). Resistive touch control is being supported by the Raspberry Pi OS or Raspbian (directly-pluggable). However, we will still need to install the driver for graphic display :)

    This LCD is actually compatible with all Raspberry Pi board that has 40-pin GPIO, including the Raspberry Pi Zero and Zero W, WH series.

    However, there is a dedicated case/enclosure and a low-profile heatsink with a fan for this LCD to fit perfectly on the Raspberry Pi 4 Model B. The case has an opening for the LCD, and the low-profile heatsink with a fan keeps the Raspberry Pi 4 Model B protected and cool! You get a perfect console :) Don't forget to remove the top lid/cover of the enclosure for the 3.5-inch LCD.

     

    Note: The Raspberry Pi 4 Model B, 3.5-inch Enclosure, and the Low-Profile Heatsink with a fan are NOT INCLUDED in this product, please get them separately.

    As we understand, Raspberry Pi 4 Model B delivers great performance and of course, more power will generate more heat as of all CPU :) So we need a way to install an additional heatsink to dissipate the extra heat. It will be better if we can have the option to add a cooling fan for active cooling. Well, this 3.5-inch touch screen LCD comes ready with the heatsink and cooling fan for you to use with the Raspberry Pi 4 Model B. it solves all the concerns.

    Note: The Low-Profile Heatsink with a fan is NOT INCLUDED in this product, please get it separately.

    The 3.5-inch touch screen uses the GPIO on the Raspberry Pi board, so it stretches out 2 pins as the power to supply the cooling fan on the low profile heatsink, and keep the Raspberry Pi board cool!

     

    Note: The Raspberry Pi 4 Model B, 3.5-inch Enclosure, and the Low-Profile Heatsink with a fan are NOT INCLUDED in this product, please get them separately.

    The Graphic driver is provided and can be downloaded for Raspberry Pi OS/Raspbian. It also supports Ubuntu and Kali Linux. Do follow the steps here: http://www.lcdwiki.com/MHS-3.5inch_RPi_Display

    Note: Please use the recommended system for the touch screen. If another system is used, it may not have the touch function or may not work. You need to configure it yourself. Because there are many systems that the Raspberry Pi can use, we can’t make every system compatible with the touch screen.

    ระยะเวลาในการรับประกัน: 12 เดือน
    คุณสมบัติ
    • 3.5-inch TFT LCD screen with high-speed SPI interface
    • Compatible with the latest Raspberry Pi 4 Model B
    • Graphic drivers can be installed from Github, please refer to the steps here
    • Support Raspberry Pi OS/Raspbian, Ubuntu, and Kali Linux Operating System
    • Match perfectly with the 3.5-Inch Touch Screen ABS case (not included)
    • Comes with 2-pin 5V and GND header to power a cooling fan.
    • 3.5 inches LCD Spec:
      • Screen Type: TFT
      • LCD Driver : ICILI9486
      • Touch: Resistive Touch Control
      • Touch Controller: XPT2046
      • Resolution: 480 * 320
      • Refresh Rate: 50Hz
      • Interface: SPI (Input 125MHz)
      • Backlight: LED
      • Backlight Current: 120mA
      • Power: 5V
      • Operating Environment: -20 ~ 70 ℃
      • Size: ~ 89 x 60 x 30mm/3.5 x 2.36 x 1.18"


    Installing the graphic driver for the LCD on the Raspberry Pi 4 Model B:

    1. Please get a microSD card with the latest NOOBS/Raspberry Pi OS/Raspbian, or update the OS.
    2. Stack the LCD onto Raspberry Pi, before the graphic driver is installed, the Raspberry Pi will output graphics to an HDMI port, so you will need a monitor, mouse, and keyboard to access the terminal.
    3. Access to Raspberry Pi OS through the terminal or SSH too.
    4. Install the graphic driver into Raspberry Pi OS
    5. Execute the following command:
      1. sudo rm -rf LCD-show
      2. git clone https://github.com/goodtft/LCD-show.git
      3. chmod -R 755 LCD-show
      4. cd LCD-show/
      5. sudo ./MHS35-show
    6. After this command, the Raspberry Pi will restart and the graphic will be displayed on 3.5 LCD instead of HDMI port.
    7. The touch screen works without any special driver, as we tested on the latest Raspberry Pi OS (30 July 2020).
    8. For more details, please refer to this link: http://www.lcdwiki.com/MHS-3.5inch_RPi_Display
    รายการบรรจุภัณฑ์
    • 1 x 3.5-inch TFT resistive touch screen, 50FPS (Black color PCB)
    • 1 x Touch Pen

    แหล่งที่มาข้อมูล
    • Wiki page to install the graphic driver and other useful commands
    Q & A

    Ask a question

    ความคิดเห็น
    • 4.9 out of 5
                    
    เรียงตาม:

    แท็ก: active cooling, console