3.5-Inch TFT Touch Screen for RPI 3B/3B+/4B

3.5-Inch TFT Touch Screen for RPI 3B/3B+/4B

    • Login to view ProMaker's Insider Price!
    • THB543.60(VAT included)
  • Ex Tax: THB543.60
    • 10 ชิ้นขึ้นไป THB500.19
    • 20 ชิ้นขึ้นไป THB434.88
  • เงินคืน: THB16.31
  • ยอดคงเหลือ CytronCash: เข้าสู่ระบบ
  • สินค้าในสต๊อก:


กรุณาใส่จำนวนที่ต้องการก่อนคลิกปุ่ม ‘เพิ่มในรถเข็น’

Raspberry Pi 3 Model B+

Raspberry Pi 3 Model B+

  • 10 ชิ้นขึ้นไป THB1,203.17
  • 50 ชิ้นขึ้นไป THB1,127.97

THB1,253.30 Ex Tax: THB1,253.30

  • อุปกรณ์เสริมทั้งหมด: THB0.0
  • ผลรวมทั้งสิ้น: 543.6

  • รหัสสินค้า: DS-TFT-3.5
  • ระยะเวลาในการรับประกัน: 12 เดือน
  • Shipping:

Is this not the cutest, little display for the Raspberry Pi? It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay so it is slightly larger than the Raspberry Pi board, which is perfect to cover it. The plate uses a high-speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video, etc. Best of all it plugs right on top nicely covering the Raspberry Pi board. Single power from Raspberry Pi is sufficient to operate the screen. As it uses the SPI and Power pin from Raspberry Pi's GPIO, it is nicely stacked on the Rpi board. We also carry the perfect case/enclosure for Raspberry Pi 3B/3B+ and also 4B to be used with this LCD.

check this video out where we assemble the Raspberry Pi 3B+ and the LCD enclosed with the case.

And here is the LCD in action:

Here is another video in Bahasa Malaysia with English Subtitles to install the graphics and touch screen driver on Raspberry Pi 4 Model B:
Here is pin assignment table of this touch screen LCD:

Note: The graphic can only be displayed through HDMI or this Touch Screen LCD.

We have tested and verified this touch screen LCD with:

Yet, it should be working perfectly with:

Note: Do remember to install the driver for graphic and also touch screen controller :)


  • 480x320 resolution
  • Universal 3.5” Display for the Raspberry Pi
  • Compatible with Raspberry Pi A, B, A+, B+, and Pi 2/3/4 versions
  • Powered not only from your computer but also from your portable power
  • Adapt for Raspbian system
  • LCD Type: TFT
  • LCD Interface: SPI
  • Touch Screen Type: Resistive
  • Touch Screen Controller: XPT2046
  • Colors: 65536
  • Backlight: LED

Packing List:

  • 3.5" TFT Resistive Touch Screen with SPI Interface
  • Small Pen


Check out the calibration process:

Here are the steps we refer from this wiki page to install driver graphic controller and touch screen controller:

Driver Installation:

This LCD Module need install driver first:

1. Assuming you have run Raspbian either from NOOBS or Raspbian Image, please get the image from here, or the microSD card with NOOBS from here: 16GB, 32GB.

2. Open terminal(SSH) and install the driver on Raspberry Pi: (tested on Raspberry Pi 3B+,3B,2B,2B+,1B,ZERO)

Run these commands in terminal:

sudo rm -rf LCD-show

git clone https://github.com/goodtft/LCD-show.git

chmod -R 755 LCD-show

cd LCD-show/

sudo ./LCD35-show

Wait a few minutes, after reboot, the graphic will appears on touch screen LCD.

Touch screen calibration:

This LCD can be calibrated using a program called xinput_calibrator. Install it with the commands:

cd LCD-show/

sudo dpkg -i -B xinput-calibrator_0.7.5-1_armhf.deb

Click the Menu (Raspberry Pi Logo) button on the task bar, choose Preference -> Calibrate Touchscreen.

Finish the touch calibration following the prompts. Maybe rebooting is required to make calibration active.

You can create a 99-calibration.conf file to save the touch parameters (not necessary if file exists).


For detailed steps, please visit this page.

Can 3.5inch RPI LCD (A) V3 connected to RPI 4 , is there a driver to update for Pi4 (4G)? TQ ( Tan Yock Pon , 31/10/2020 )
Hi, yes can. It comes with driver ya. Thanks :)
Is this work on arduino? ( Mashiro, 21/11/2019 )
Hi, we're sorry as the header pin for this product is designed for Raspberry Pi. Thanks :)
Is it compatible with Pi 4? ( Virat Jiarapakdee , 09/08/2019 )
Hi, this item is compatible with Raspberry Pi 4
I am unable to install the Drivers , Please guide me how to do

( Janarthanan, 02/06/2019 )
Hi, please post this question on our forum as here is for short inquires only.
When will this restock? ( Vento, 15/10/2018 )
Hi, this item will available in 3-4 weeks
Does it work with Kali Linux? ( Jay, 28/09/2018 )
Hi sorry, we are sure about that but this item Adapt for the Raspbian system.
is the stylus in the picture included ( Abdul Rahim, 31/05/2018 )
Hi, yes it is included. Thanks.
The backlight is led. Mercury Free? ( Tariq Abhar, 22/03/2018 )
Hi, yes the backlight is LED. However we don't have any information regarding chemical involved from the supplier. Thanks.
is this suitable for raspberry pi zero W? ( Hasmilazlan, 25/01/2018 )
Hi, this item can work with Raspberry PI Zero W. Thanks
Hi, may i ask what is in the box ? any wire or we need to purchase external wire for connect the display ?
( HoTF, 18/12/2017 )
Hi, this display can be stacked directly to Raspberry Pi 3 GPIO pin. For more information, please refer to this Wiki page. Thanks.

Ask a question

Note: HTML is not translated!
  • 4.9 out of 5
ความคิดเห็นทั้งหมด (78)
  • 5
  • 4
  • 3
  • 2
  • 1

แท็ก: TFT Screen, Raspberry Pi Screen, 3.5" Screen