650nm Laser 5V 5mW Module

This breakout board allows controller like Arduino to control laser pointer using GPIO pin. This is a 650nm (Red) laser emitter that breakout the power pin to standard 2.54mm header pin. This is 5V power at 5 mW (milliWatt) only. Quite easy to use, just power the laser with 5.0V or 3.3V.

From our test, the pin diagram is as followed:

And to control the Laser light, you can use the GPIO pin from Arduino to direct drive the VCC pin.

Features and Spec:

• Output Power: 5mW
• Wavelength: 650nm (Red)
• Working Voltage: 3.3V to 5.0V
• Operating Current: less than 40 mA
• Laser Shape: Dot
• Working temperature: -10 °C ~+40 °C
• Housing: Copper
• Dimensions: 6.5 x 18 mm

• 1 x 650nm Laser 5V 5mW Laser Module

• KY-008 Arduino Laser Module: Guide and Tutorial, by Henry's Bench