รถเข็นของคุณว่างเปล่า!
Industrial IoT Expansion Module Powered by Raspberry Pi CM4
- แบรนด์ WaveShare รหัสสินค้า: CM4-IOT-W MPN: 20970
สินค้าในสต๊อก: 4
This is a Raspberry Pi CM4 expansion module desgined for industrial IoT application such as IoT gateway and wireless rounter. It comes with a gigabit ethernet port, 1 x HDMI, 3 x USB 2.0 as well as the M.2 slot for 4G / 5G / LoRa modules. The common industrial interfaces such as RS485, CAN, and RTC are also available on this device.
Specification:
CM4 SOCKET | suitable for all variants of Compute Module 4 |
---|---|
NETWORKING | Gigabit Ethernet RJ45 |
M.2 B KEY / Mini-PCIe (via adapter), for connecting 5G / 4G / LoRa wireless module | |
Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication | |
USB | USB 2.0 × 3 |
PIN HEADER | Non-isolated RS485 × 2, Non-isolated CAN × 1, Partial GPIO pins |
CAMERA | MIPI CSI-2 × 1 (15pin 1.0mm FPC connector) |
VIDEO | HDMI × 1, supports 4K 30fps output |
RTC | Real-time clock with battery socket and ability to wake Compute Module 4 |
STORAGE | MicroSD card socket for Compute Module 4 Lite (without eMMC) variants |
FAN HEADER | 5V/12V, allows speed adjustment and measurement |
POWER INPUT | 5V or 7~36V |
DIMENSIONS | 145 × 90 × 40mm |
The Carrier Board also has an ABS Case/Enclosure with DIN Rail Mounting at the back. Easy to install and safe to use!
And there is room for you to install a heatsink or a cooling fan on the module. But both heatsink and cooling fan need to be ordered separately.