*แจ้งวันหยุด* ทางบริษัทจะปิดทำการวันที่ 22 และ 29 กรกฎาคม 67 ตามปฏิทินวันหยุดของไทย เพราะฉะนั้นออเดอร์จะทำการจัดส่งอีกครั้งในวันทำการถัดไป

Jetson Nano B01 Beginner Kit - with casing and PSU

THB9,033.00 (VAT included)
เงินคืน: THB253.26
สินค้าในสต๊อก: Out Of Stock
แจ้งให้ฉันทราบ!

Buy locally from a partner

ประเทศ:
รายละเอียด

Note: Currently NVIDIA Jetson Nano, NX & Xavier Devkits are facing supply constraint. Hence, we are bringing a promising alternative solutions for you, the reComputer Jetson Nano Dev Kits:


This is Jetson Nano Beginner Kit V2. The kit includes everything you need to get started with the Jetson Nano B01 AI development board.

The kit comes with:


 
 

Here's NVIDIA Jetson. The Jetson Nano delivers the performance to run modern AI workloads in a small form factor, power-efficient (consuming as little as 5 Watts), and low cost. Developers, learners, and makers can run AI frameworks and models for applications like image classification, object detection, segmentation, and speech processing. The developer kit can be powered by a micro-USB or 2.1mm DC Barrel Plug and comes with extensive I/Os, ranging from GPIO to CSI. This makes it simple for developers to connect a diverse set of new sensors to enable a variety of AI applications.

Jetson Nano is also supported by NVIDIA JetPack™, which includes a board support package (BSP), Linux OS, NVIDIA CUDA®, cuDNN, and TensorRT™ software libraries for deep learning, computer vision, GPU computing, multimedia processing, and much more. The software is even available using an easy-to-flash SD card image, making it fast and easy to get started.

The same JetPack SDK is used across the entire NVIDIA Jetson family of products and is fully compatible with NVIDIA’s AI platform for training and deploying AI software. This proven software stack reduces complexity and overall effort for developers.

This kit also comes with 64GB, Class 10, U1, A1 grade MakerDisk microSD card, preloaded JetPack, ready to boot up on the Jetson Nano B01 board. Please DO NOT format it if you intend to use it with the board.

In case you intend to use any other version of JetPack or OS, we also include a cute little USB microSD Card Reader and Writer together in the package. It's compact, lightweight and it's wicked fast. Supports up to 128 GB SDHC cards! Simply slide the card into the edge, flip it over, and plug it into your computer's USB port. No driver is required, it shows up as a standard 'Mass Storage' device under any OS. Download the BalenaEtcher to load the JetPack into the MicroSD.

This kit comes with a 5V 4A 2.1mm DC Barrel Plug power adapter to power up your Jetson Nano.

The following shows an NVIDIA Jetson Nano Developer Board that connects with this adapter:

The Power SMD LED will light up if the board is powered up. Since this kit includes a power adapter with DC Barrel Plug (2.1mm), a mini jumper is needed on J48 (connect both pins, also included in the kit).

The NVIDIA Jetson Nano development board will need high power during the development and testing. When you use a 5V 4A power supply, you can satisfy most application use cases. Under a stress test, the CPU and GPU will be in a full load. At the same time, the whole system can reach 3.5A, and the 4A power supply can meet all the needs.

We also included a Raspberry Pi 8MP camera module (which is compatible with Jetson Nano), an acrylic case, and an acrylic camera mount for a little bit more fun! Since the NVIDIA Jetson Nano development board does not come with any wireless module, you will also get an AC8265 WiFi Bluetooth NIC Module.

Raspberry Pi 8MP Camera Module V2 is a camera module developed by the Raspberry Pi foundation but is fully compatible and works well with Jetson Nano. It features an ultra-high quality 8MP(megapixel) SONY IMX219 image sensor, and a fixed focus lens. This V2 camera module is capable of 3280 x 2464 pixel static images, and also supports 1080p @30fps, 720p @ 60fps and 640x480p90 video. 

Check out this demo of Jetson Nano interface with Raspberry Pi Camera Module V2, by JetsonHacks:

AC8265 WiFi Bluetooth NIC Module for Jetson Nano with M.2 interface can be fixed to Jetson Nano for wireless communications offering WiFi and Bluetooth. The wireless card is fixed onto the Jeston Nano board by screws and the antenna can be attached to our acrylic case. It requires no driver installation and supports 5G/2.4G dual-band wifi, wide network coverage, coupled with 3db large gain dual antenna, even if in the complex wireless environment with multi-interference, it can also have good wireless penetration, making data reception smoother.

Features:

Jetson Nano Dev Kit:

  • Jetson Nano Rev: B01
  • GPU: 128-core Maxwell™ GPU
  • CPU: Quad-core ARM A57
  • Memory: 4 GB 64-bit LPDDR4 25.6 GB/s
  • Storage: MicroSD (included)
  • Video Encoder: 4Kp30| 4x 1080p30| 9x 720p30 (H.264/H.265)
  • Video Decoder:4Kp60| 2x 4Kp30| 8x 1080p30| 18x 720p30| (H.264/H.265)
  • Power input:
    • Micro-USB 5V
    • DC Power 5V 2.1mm DC Barrel
  • Camera: 2x MIPI CSI-2 DPHY lanes
  • Connectivity: Gigabit Ethernet, M.2 Key E expansion connector (Recommendation: AC8265 Dual-mode NIC)
  • Display: HDMI and DP
  • USB:
    • 4 x USB 3.0 
    • USB 2.0 Micro-B
  • Extension interface:
    • GPIO
    • I2C
    • I2S
    • SPI
    • UART
  • Fan connector
  • PoE connector
  • Dimensions: 100mm x 80mm x 29mm

 

MicroSD card:

  • A microSD card from Makers to Makers!
  • Brand: MakerDisk
  • Capacity/Size: 64GB
    • 1GB = 1,000,000,000 bytes.
    • Actual usable capacity may be less, depending on the format. From JetPack OS, here is the capacity from file explorer, excluding the boot drive: ~ 56.9GB
    • Check the capacity calculation from Wiki.
  • Pre-loaded with JetPack OS, it is ready to boot up on Jetson Nano B01 right out of the box!
  • The test results are better than Class A1 and Raspberry Pi Standards, which is definitely great for Jetson!
    • Class 10, A1, U3, V30 microSD card
    • Random IOPS - Read: > 2700 IOPS (A1 standard 1500 IOPS, Raspberry Pi Standard 2000 IOPS)
    • Random IOPS - Write: > 800 IOPS (A1 standard 500 IOPS, Raspberry Pi Standard 500 IOPS)
    • Sequential Write: > 32MB/S (A1 Standard 10MB/S, Raspberry Pi Standard 12MB/S)

USB microSD Card Reader and Writer:

  • Compact and lightweight
  • Support most of OS: Win7,8,10, MacOS, LINUX
  • USB2.0 Speed
  • Plug and use
  • Support up to 128GB microSD card
  • No driver is needed
  • Both Read and Write functions
  • Dimension: 15mm x 7mm x 24.8mm

Power adapter:

  • Input: 100-240V ~50/60Hz 0.7A Max
  • Output voltage: 5V
  • Maximum output current: 4A
  • Plug: UK Plug, Type G
  • Terminated with DC Barrel Plug (5.5mm outer, 2.1mm inner)

Raspberry Pi camera module

  • 8MP SONY IMX219 image sensor
  • Wider image, capable of 3280x2464 stills, 1080p30 video and so forth
  • Small and light
  • Fixed focus lens on-board
  • Integral with IR (infrared) filter
  • 150mm CSI camera cable included
  • 8-megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
  • Supports 1080p30, 720p60 and 640x480p90 video
  • Size 25mm x 23mm x 9mm
  • Weight just over 3g
  • Connects to the Nvidia Jetson Nano via a short ribbon cable (supplied)

AC8265 Wireless Module

  • No need to install drivers, just plug and play
  • Supports 5G/2.4G dual-band wifi
  • IEEE802.11 ac
  • Supports Bluetooth / wifi dual mode
  • Superior quality, coupled with two 3db large gain antennas, transmission speed up to 867Mbps
  • The antenna can be rotated within 90°, the user can adjust the angle to improve signal sensitivity
  • Compatible with NVIDIA Jetson Nano B01 and A02
  • Compatible with the acrylic case, two antennas can be fixed on the case too.

Packing list:

    Resources:

     

    ระยะเวลาในการรับประกัน: 12 เดือน
    Q & A

    Ask a question

    ความคิดเห็น
    • 4.6 out of 5
                    
    เรียงตาม:

    แท็ก: NVidia, Deep Learning, AI, Kit, Getting Started, Complete kit, microSD card with JetPack, Preloaded