ทางบริษัทขอเรียนแจ้งให้ทราบว่า ทางบริษัทจำเป็นต้องปรับราคาขึ้น (ประมาณ 3-5%) ตั้งแต่วันที่ 22 เมษายน 2564 เป็นต้นไป เนื่องจากบริษัทของเราได้เผชิญกับแรงกดดันด้านต้นทุนวัสดุที่เพิ่มขึ้น, ต้นทุนโลจิสติกส์ที่เพิ่มขึ้นและเงินบาทอ่อนค่า
Lattice Textured Glass Build Bed Plate 235x235x4mm

Lattice Textured Glass Build Bed Plate 235x235x4mm

    • Login to view ProMaker's Insider Price!
    • THB392.60(VAT included)
  • Ex Tax: THB392.60
    • 5 ชิ้นขึ้นไป THB372.97
    • 10 ชิ้นขึ้นไป THB333.71
  • เงินคืน: THB11.78
  • ยอดคงเหลือ CytronCash: เข้าสู่ระบบ
  • สินค้าในสต๊อก:
    13

อุปกรณ์เสริมที่คุณอาจจะต้องการ

กรุณาใส่จำนวนที่ต้องการก่อนคลิกปุ่ม ‘เพิ่มในรถเข็น’

Glass Heat Bed Stainless Steel Clip

Glass Heat Bed Stainless Steel Clip

  • 4 ชิ้นขึ้นไป THB26.43
  • 20 ชิ้นขึ้นไป THB22.65

THB28.69 Ex Tax: THB28.69

  • อุปกรณ์เสริมทั้งหมด: THB0.0
  • ผลรวมทั้งสิ้น: 392.6

  • รหัสสินค้า: 3D-HB-GL-235
  • ระยะเวลาในการรับประกัน: 12 เดือน
  • ส่งจาก: Malaysia
  • Shipping:

This is a pretty nice, easy-to-use Lattice Textured Glass Build Bed Plate for your 3D printer.

A 3D printer glass bed is arguably the best option when aiming for a flawless print bottom. Not only that, it’s also remarkably easy to remove prints from glass (providing your bed was clean before the print).

It’s widely accepted that no one build plate is best; what’s ideal for you largely depends on what you want to print. Glass as a bed for your 3D printer, however, gives many benefits that are worth considering.

Generally speaking, what makes glass a good option is that it’s a reliably flat, stiff, dense, and cheap material. As a print bed, it has a number of characteristics and advantages that you should keep in mind when in the market to replace your print bed which includes:

  • Flatness: Print beds need to be flat throughout printing to avoid running into errors. When produced properly, glass is naturally stiff and thermally stable. Therefore, it remains flat and will ensure your bed’s leveling remains consistent. After all, the tedium of leveling and calibrating is never fun.
  • Smooth finish: Designers want the bottom of their prints to be as smooth as possible, and glass guarantees such a finish. It gives a mirror-like, glossy base that can’t be achieved with most other surfaces.
  • Durability: A good number of surfaces can’t stand repeated use because of the heating and contraction. Plastic or acrylic bases, for example, will eventually need a replacement because the surface will start to chip, scratch, warp, or peel. Meanwhile, glass rarely needs replacing because it hardly wears. That means you can enjoy consistent high-quality prints for a long time.
  • Cost: By virtue of its durability and little need for replacement, a glass bed will save you money (and time) down the road.
  • Easy removal: No one likes using force to remove a print from a print bed. Not only is there a chance to break more fragile models, you also risk hurting yourself or damaging some component of your printer when the model does finally pop off, sending hand, scraper, and print flying. Glass print beds are famous for easily releasing prints, which makes the whole printing experience that much more enjoyable.
  • Easy cleanup: Beds commonly gather grease, dust, and unwanted plastic fragments that result in an uneven and unreliably adhesive print surface. This makes cleaning a necessity, and few printer beds clean as easily as a smooth sheet of glass, again thanks to its smooth, flat, and stiff surface.
  • Uniform heating: Even for materials that don’t require need it, heating the print bed can greatly improve how well a model prints. Lacking thermal conductivity, glass beds typically take longer to heat up, but they also spread heat much better than other surfaces. This can greatly help when experiencing first layer issues, as you can be sure different areas will be affected similarly.

Features and specifications:

  • Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing.                            
  • Easy to take off models by hand or with a little help from the scrapper for very large model
  • Ultrabase integrated with heated bed: Super Flatness, Fast and uniform heating
  • Durable: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400ºC.
  • Easy to clean: Ultrabase is easy to clean by alcohol/water.
  • Size: 235x235x4mm (Compatible with Creality Ender 3, Ender 3 Pro and Ender 3 V2 etc)

Packing list:

  • 1 x Lattice Textured Glass Build Bed Plate 235x235x4mm 

No questions have been asked about this product.

Ask a question

Note: HTML is not translated!
  • 5 out of 5
                  
ความคิดเห็นทั้งหมด (1)
  • 5
    100%
  • 4
    0%
  • 3
    0%
  • 2
    0%
  • 1
    0%

แท็ก: Glass Bed, 3D printing, Glass Platform