12V 24RPM 12kgfcm 32mm Planetary DC Geared Motor with Encoder

Note: Motor's warranty period is 3 months from the purchase date.

The planetary geared motor is always well known for its low backlash and higher efficiency characteristic to meet the higher expectation. It is manufactured by an established Taiwanese motor company that well known for its quality and durability. 

The motor comes with a 264:1 gear head that produced 24 RPM and 1.2N.m torque. It is suitable for general purpose automation projects. It also comes with a 7 pulses per rotation encoder feedback to provide real-time feedback on the rotating position. 

Note: There are four stages reduction gear box, with 1st stage (near to motor shaft) is plastic planet gears; 2nd, 3rd and 4th stage (near to output shaft) are metal planet gears. All stage sun gears are metal.

Specifications:

• Voltage: 12VDC
• Rated Torque:12.24kgf.cm (1.2N.m) 
• Rated Speed: 24 RPM(round per minute)
• Rated Current: 900mA 
• Rated Power: 7W
• Weight: 293g
• Shaft: 6.0 mm diameter x 16.3 mm length
• Motor dimension (w x l x h): 32.0 mm x 32.0 mm x 109.7 mm, detailed drawing
• Cable length: 100mm
• Compatible motor driver:
  • Arduino-Shield 2Amp
  • Arduino Shield - Shield-3AMotor
  • MDD3A - Dual Channel Motor Driver
  • MD10C - 13A single channel motor driver
  • MD13S - 13A SMD single channel motor driver
  • MDD10A - 10A dual channel motor driver
• Gear ratio: 264:1
• Encoder Output: 1848 pulses per rotation, single channel output
• Brushed motor type

Encoder Circuit Connection (to Arduino):

Note: Don’t forget the 10kΩ resistor (Pull-up) connection to Arduino digital pin. Refer to the picture below for your reference.

• 1 x 12V 32mm Planetary DC Geared Motor with Encoder

Tutorials:

• Quadrature Encoder
• How to choose a suitable motor
• Arduino + 2A Motor Shield + Encoder Motor

Resources:

• Encoder specification
• Motor technical drawing and specifications