IMX219 Multi-Camera Kit for Jetson AGX Orin

Arducam IMX219 Camera Kit – A multi-camera solution designed for the NVIDIA Jetson AGX Orin. The kit comes with 6 x 8 MP IMX219 camera modules, 6 x 30cm 15-15pin FPCs, 1 x camera adapter with 6 CSI-2 interfaces.

A distinctive feature of the AGX Orin is its lack of a native camera interface, which is unfriendly to those who want to extend the camera vision on the dev board. Recognizing this gap, we present this innovative camera adapter board. Outfitted with 6 CSI-2 15pin connectors, and this adapter empowers you to seamlessly integrate up to 6 camera modules. A remarkable advantage of this multi-camera setup is the independent operation of each camera module. Please note that these modules must be of the same model and cannot be mixed to ensure optimal performance.

This breakthrough engineering ensures that you can harness the full potential of each camera module simultaneously, capturing diverse perspectives and enhancing your project’s scope.

Note: 

• For NVIDIA Jetson Official Developer Kits only, third-party carrier boards are not supported.
• The camera kit supports JetPack 5.1.1/L4T 35.3.1 and above. Additional driver configuration is required before use, please refer to Quick Start Guide for details.

• Designed for the NVIDIA Jetson AGX Orin Dev kit
• Based on 8MP IMX219 CMOS
• Built-in ISP image processing
• Support up to 6 cameras at the same time
• All 6 cameras support video streaming individually

Specifications:

• Camera
  • Image Sensor: IMX219
  • Still Resolution: 8 Megapixels
  • Video Modes: 3280×2464@21fps, 3280×1848@28fps, 1920×1080@30fps, 1640×1232@30fps, 1280×720@60fps
  • Sensor Resolution: 3280 × 2464 pixels
  • Sensor image area: 3.68 x 2.76 mm (4.6 mm diagonal)
  • Pixel Size: 1.12 µm x 1.12 µm
  • Optical Size: 1/4″
  • IR Sensitivity: Integral IR-cut Filter, visible light only
• Lens
  • Focus Type: Fixed Focus
  • FOV: 62.2°(H)×48.8°(V)
  • Lens Type: Stock Lens
  • F.NO: F2.0
  • E.F.L: 3.04mm
• Electrical & Mechanical
  • Camera Board Size: 25 × 24 mm
  • Peaking Current: 300mA

• 6 x IMX219 Camera Module with Case
• 6 x 30cm 15-22pin FPC
• 1 x Camera Adapter for NVIDIA Jetson AGX Orin
• 1 x Screw Pack 

• Quick Start Guide