WS2812B NeoPixel LED with Buzzer Stick-6 LED

This is a special PCB stick with 6 addressable LEDs (Neopixel) and an active buzzer in the center.

This is a small chainable board with eight 5050 WS2812 RGB LEDs. The WS2812s are each addressable as the driver chip is located inside the LED. Each NeoPixel Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires 5V.

Every stick is equipped with a single data line with a very timing-specific protocol requiring a real-time microconroller with a 8MHz or faster processor such as an AVR, Arduino, PIC, mbed, etc. There are solder pads on the back for connecting wires or breadboard pins and two mounting holes for securing this board to many different surfaces

Features:

• This product is equipped with six (6) WS2812 or SK6812 Neopixel RGB LEDs and a buzzer
• The WS2812 is an individually controllable RGB LED
• The RGB LEDs operating voltage: 5VDC
• Item: LED Board with Buzzer
• Light: 5050 Package RGB full color WS2812B lamp.
• Buzzer Operating Voltage: 5V (4 ~ 7V)
• Separated control for the LEDs and Buzzer
• PCB size: 1cm x 5cm

Packing List:

• 1 x WS2812B NeoPixel LED with Buzzer Stick-6 LED