Aluminum Case with VESA Bracket for Raspberry Pi 5

Another perfect Aluminum case for the newly launched Raspberry Pi 5. I am pretty sure you will notice that this newly launched powerful credit-card size (nearly) Single board computer is quite warm or even hot even during normal operating. You need active cooling for most of the applications. Well, you will love this enclosure. This is a pretty fancy yet practical case designed for Raspberry Pi 5, it comes in two main Aluminum alloy parts: the base and the top cover with a lot of air ventilation holes and can also be used to mount the heatsink and cooling fan. Because of the aluminum alloy case, it offers solid, robust yet lightweight solutions to protect the Raspberry Pi 5, not to forget cooling this powerful SBC too.

There are only two main parts, simply unscrew the top Phillips screw and detach the top cover, place the Raspberry Pi 5 into the base case, align it with 4 standoffs, and secure it with 4 small Phillips screws provided to make sure your SBC does not drop off when you move it.

There are two more brackets to make it VESA 75x75 compatible, again, secure it if you need to mount this case to an LCD monitor. Of course, the bracket is optional.

Note: You will need M4 screws to mount the case onto VESA 75x75 monitor.

It offers plenty of inner space, and if you need to access the 40-pin GPIO of Raspberry Pi, there is a gap at the side for you to extend the GPIO out with a 40-way IDE cable. It is a perfect casing for educators, beginners, or makers who need to access the 40-pin GPIO. It also reserves space for Raspberry Pi 5 Heatsink and Active Cooler!

However, the CSI/DSI ports are not accessible from the case.

The case reserves the space for:

• 40-pin GPIO via 40 ways IDE cable like T-Cobbler
• microSD card slot
• USB Type C port for power
• 2 x Micro HDMI port
• 2 x USB 2.0 Port
• 2 x USB 3.0 Port
• 1 x Ethernet Port
• Raspberry Pi 5 Heatsink and Active Cooler

Note: This product is just the case. It does not come with the Raspberry Pi board.

• Aluminum Alloy coated with BLACK color
• Two main parts only, base and top
• Have enough space reserved for heatsink and cooling fan
• Two additional brackets to make this case VESA 75x75 compatible
• Designed for Raspberry Pi 5
• Can fit Raspberry Pi 5 Heatsink and Active Cooler
• Dimension: 90mm (length) x 84mm (width) x 34mm (height)

• 1 x Aluminum RPi5 Case
• 2 x Aluminum Bracket to make it VESA 75x75 compatible
• 10 x Phillips Mounting Screw
• 1 x Phillips Screwdriver