Raspbot AI Vision Robot Car with FPV Camera (without Raspberry Pi)

Note: The MakerDisk microSD card comes preloaded with a custom OS for Raspbot.

Note: This kit is designed for Raspberry Pi 5. If you want to use the Raspbot with Raspberry Pi 4:

• Flash again the microSD card with the OS for Raspberry Pi 4. Get the system image here.
• Get another CSI cable for the camera.

Raspbot is specially designed for AI beginners to learn AI at the lowest cost. It is suitable with the latest Raspberry Pi 5 development board and features a multifunctional expansion board as the chassis, equipped with four TT motors, a high-definition camera, four-channel tracking, and an ultrasonic module.

Like other smart cars on the market, it can perform standard functions such as tracking, ultrasonic and infrared avoidance, and making whistle noise. The difference is that we have created a series of AI vision functions for Raspbot based on OpenCV and Python3 programming. Users can control this robot car via the Smartphone App, IR remote control, and Jupyter Lab web interface.

• Simple structure and easy to assemble.
• Perfect for AI beginners to learn AI.
• Rich Control method
  • Mobile Apps (Android & iOS)
  • PC (Jupyter Lab)
  • IR Control
• Basic robotic car features:
  • Line following
  • WiFi remote control
  • Obstacle avoidance
• AI features:
  • Color recognition follow
  • Color recognition tracking
  • Face recognition and tracking
  • QR code control

Robot Specifications:

• Camera Platform: Two Degrees of Freedom, 180 Degrees Up, Down, Left and Right
• Input:
  • Wide Angle Camera
  • Infrared Sensor
  • Infrared Receiver
  • Ultrasonic Sensor
  • Four-channel Tracking Sensor
  • IIC Interface
  • Serial Interface
• Output:
  • Passive Buzzer
  • PWM Servo
  • TT DC Motors
• Power Solution: 12.6V Power Battery Pack
• Life Time: 180 minutes
• Circuit Safety Protection:
  • Reverse Connection Protection
  • Over Current Protection
  • Low Voltage Protection
  • Short Circuit Protection
• Body Material: Epoxy Fiberglass Board
• Motors:
  • Reduction Ratio: 1:48
  • 6V Carbon Brush TT Motor
• Dimension After Assembly: 240mm x 158mm x 150mm
• Assembled Weight: 528g (without Raspberry Pi)

Camera Specifications:

• Pixels: 5 million Pixels
• Photosensitive Chip: OV5647
• Static Resolution: 2592*1944 support 1080P@30FPS / 720p@60FPS / 480P@90FPS Video Recording
• Field of View: 65 Degrees
• Size: 25mm x 24mm x 9mm
• Interface: CSI
• Cable Material: FPC
• Cable Length: 30cm

Raspbot with Raspberry Pi 5 (8GB RAM)

• 1 x Raspberry Pi 5 Mainboard
• 1 x 32GB MakerDisk microSD card preloaded with Raspbot OS
• 1 x Car Expansion Board
• 1 x Camera Platform PCB
• 1 x PTZ Component
• 4 x Tire
• 4 x Motor Fixing Frame
• 1 x Four-channel Tracking Module with 6-pin Cable
• 4 x Motor
• 1 x Battery and Velcro
• 1 x 40-pin Cable
• 1 x Camera with Cable
• 1 x Ultrasonic Sensor
• 1 x Remote Control
• 1 x Screwdriver
• 1 x 12.6V Charger (EU Plug)
• 1 x UK Plug Universal Adapter (FREE)
• 7 x Screw Pack
• 1 x Manual (not shown in the picture)

Raspbot with Raspberry Pi 5 (4GB RAM)

• 1 x Raspberry Pi 5 Mainboard
• 1 x 32GB MakerDisk microSD card preloaded with Raspbot OS
• 1 x Car Expansion Board
• 1 x Camera Platform PCB
• 1 x PTZ Component
• 4 x Tire
• 4 x Motor Fixing Frame
• 1 x Four-channel Tracking Module with 6-pin Cable
• 4 x Motor
• 1 x Battery and Velcro
• 1 x 40-pin Cable
• 1 x Camera with Cable
• 1 x Ultrasonic Sensor
• 1 x Remote Control
• 1 x Screwdriver
• 1 x 12.6V Charger (EU Plug)
• 1 x UK Plug Universal Adapter (FREE)
• 7 x Screw Pack
• 1 x Manual (not shown in the picture)

Raspbot Only

• 1 x 32GB MakerDisk microSD card preloaded with Raspbot OS
• 1 x Car Expansion Board
• 1 x Camera Platform PCB
• 1 x PTZ Component
• 4 x Tire
• 4 x Motor Fixing Frame
• 1 x Four-channel Tracking Module with 6-pin Cable
• 4 x Motor
• 1 x Battery and Velcro
• 1 x 40-pin Cable
• 1 x Camera with Cable
• 1 x Ultrasonic Sensor
• 1 x Remote Control
• 1 x Screwdriver
• 1 x 12.6V Charger (EU Plug)
• 1 x UK Plug Universal Adapter (FREE)
• 7 x Screw Pack
• 1 x Manual (not shown in the picture)

• Tutorial Guide